Shaped sheet iron
Company “ COATING SYSTEMS ” produces LT sheet iron for universal usage - for roofs , fences , outside and inside coatings , suspended ceiling s and unremovable shuttering .
Roofing sheet iron
Due to the decline of the necessity for maintenance , the functional reliability of the roofing sheets with polyester (РVС) coating sheet iron is increasing with every passing year .
If heat insulation is necessary , an insulating material is put under the sheet iron - low cost price , easy assembly and choice of optimal climate .
Our qualified personnel can work out variants individually for every separate site , in accordance with the particular construction , architectural , technological and design requirements . The rich choice of heights , number of profiles and optimal length of sheet give the possibility of achieving the maximum effect , combining
Type of profile |
Effective covering area * |
Кг на кв.м при 1000 mm изходна ширина |
Thickness |
К g per sq. м at 1250 mm input width |
LT 30
|
1040 mm
(828 mm)
|
4.730 kg
5.680 kg
6.625 kg
7.570 kg
9.465 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
4.720 kg
5.665 kg
6.610 kg
7.555 kg
9.445 kg |
|
LT 35
|
1000 mm
(789 mm)
|
4.980 kg
5.980 kg
6.970 kg
7.970 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm |
4.910 kg
5.895 kg
6.875 kg
7.860 kg |
|
LT 40 -2
|
1000 mm
(750 mm)
|
5.240 kg
6.2 85 kg
7.330 kg
8.380 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm |
4.910 kg
5.895 kg
6.875 kg
7.860 kg |
|
LT 50 -1
|
936 mm
(744 mm)
|
5.275 kg
6.330 kg
7.380 kg
8.440 kg
10.550 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
5.250 kg
6.305 kg
7.355 kg
8.405 kg
10.500 kg |
|
LT 50 -2
|
980 mm
|
- |
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
5.010 kg
6.015 kg
7.015 kg
8.020 kg
10.020 kg |
|
ЛТ 55 -1
|
848 mm
(669 mm)
|
- |
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
5.790 kg
6.950 kg
8.110 kg
9.265 kg
11.585 kg |
* The effective covering area includes the overlapping of the sheets in width and it is not necessary additional sheets or % to be added for overlapping .
In brackets you see the data , obtained at width of the input material 1000 mm.
Note : К g are calculated for galvanized sheet iron .
Coating
Shaping of facades with LT sheet iron - this is the modern way for coating . It is a modern and high aesthetic merit solution for lateral and wall coating of buildings and suspended ceilings .
It is used instead of the traditional coats, both for new buildings and for refreshment of old facades.
Type of profile |
Effective covering area * |
Кг на кв.м при 1000 mm изходна ширина |
Thickness |
Кg per sq. м at 1250 mm input width |
LT 5
 |
1185 mm
(945 mm) |
4.160 kg
4.990 kg
5.820 kg
6.650 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm
|
4.145 kg
4.975 kg
5.800 kg
6.630 kg |
|
LT 16
 |
1120 mm
(905 mm) |
4 .340 kg
5 .210 kg
6 .080 kg
6. 9 50 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm |
4.390 kg
5.260 kg
6.140 kg
7.018 kg |
|
LT 22
 |
1085 mm (840 mm) |
4.675 kg
5.610 kg
6.550 kg
7.485 kg |
0.50 mm
0.60 mm
0.70 mm
0.80 mm |
4.530 kg
5.430 kg
6.340 kg
7.240 kg |
|
ЛТ 25
 |
1035 mm
(815 mm)
|
4.746 kg
5.695 kg
6.645 kg
7.595 kg
|
0.50 mm
0.60 mm
0.70 mm
0.80 mm
|
4.822 kg
5.787 kg
6.750 kg
7.715 kg
|
* The effective covering area includes the overlapping of the sheets in width and it is not necessary additional sheets or % to be added for overlapping .
In brackets you see the data , obtained at width of the input material 1000 mm.
Note : К g are calculated for galvanized sheet iron .
With LT 55-1 we can execute orders for over 4000 square meters.
Economical profiles *
Type of profile |
Effective covering area * |
Thickness |
К g per sq. м at 1000 mm input width |
LT 30-3
|
854 mm
(от изходна ширина
1000 mm)
|
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
4.600 kg
5.520 kg
6.440 kg
7.360 kg
9.200 kg |
|
LT 40-3
|
808 mm
(от изходна ширина
1000 mm)
|
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
4.860 kg
5.835 kg
6.810 kg
7.780 kg
9.720 kg |
|
LT 50-3
|
764 mm
(от изходна ширина
1000 mm)
|
0.50 mm
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
5.140 kg
6.170 kg
7.200 kg
8.230 kg
10.280 kg |
* Maximum effective area is achieved . They are used for small supporting distances and are recommendable for small inclination .
* The effective covering area includes the overlapping of the sheets in width and it is not necessary additional sheets or % to be added for overlapping . In brackets you see the data , obtained at width of the input material 1000 mm.
Note : К g are calculated for galvanized sheet iron .
Sheet iron with high profile
As unremovable shuttering the LT sheet iron has the following advantages :
- fast assembly
- eliminat ion of the necessity for deshuttering and coating
- decrease in the f inishing work
Type of profile |
Effective covering area * |
Thickness |
Кg per sq. м at 1250 mm input width |
LT 75
 |
891 mm
|
0.60 mm
0.70 mm
0.80 mm
1.00 mm
|
6. 615 kg
7. 720 kg
8. 82 0 kg
1 1.025 kg |
|
LT 85
 |
846 mm
|
0.60 mm
0.70 mm
0.80 mm
1.00 mm |
6. 965 kg
8. 130 kg
9. 29 0 kg
11. 610 kg |
* The effective covering area includes the overlapping of the sheets in width and it is not necessary additional sheets or % to be added for overlapping . |
